19-38 Combination Brush/Drum Sander (219383)

Overview

Simplify sanding with a 19-38 Combination Brush/Drum Sander! Our exclusive technology allows you to drum sand and profile sand on the same machine! Interchangeable drum and brush heads allows for unlimited applications!

  • Equipped with 180 Grit Flap Sanding Head
  • Sanding Drum Included
  • Open Stand Included
  • Variable Speed Brush/Drum Head controlled by VFD
Maximum Width(in): 38 (Two Passes)
Minimum Length (in):  5½”
Maximum Thickness (in):  4 (Varies With Application)
Minimum Thickness (in):  1/32
Dimensions (H x W x H):  24″ x 40″ x 24″
Drum Speed:  1740 RPM
Dust Hood: 1 – 4″ Vacuum Port, min. 600CFM Recommended
Conveyor: 43in. -lb torque, direct drive DC motor, ranged variable 0-10 FPM
Drive Motor (TEFC): 1¾”
Power Requirements: 110V 15 Amp
Net Weight: 264 lbs.
Shipping Weight: 371 lbs.
Shipping Dimensions (L x W x H): 43″ x 16″ x 24″

Additional Features

Flatter: Produces a hand sanded finish on profiles like moulding, raised panel doors, and plywood

Nylon: Scuff sand and defuzz stock

Wire: Pull the soft grain out from soft woods or clean reclaimed lumber

Drum: Dimension or finish sand flat stock

Simple alignment feature Just one nut will adjust the conveyor to parallel the sanding head, making aligning the conveyor to the sanding head fast and easy. Indexed alignment setting Has an indexed alignment setting for narrow and wide stock. When sanding stock wider than 19”, the index lever will properly adjust the conveyor for flawless wide sanding. Easy height adjustments A thrust bearing below the handle and a nut positioned above prevents the drum from moving out of the set position while sanding. No backlash or slop in the height adjustment mechanism allowing easier and smoother height adjustments. Extra-wide conveyor to properly support stock over 19” wide. The conveyor table is 22” wide to add support to the work piece. Excellent dust extraction, as metal dust cover is formed to shape of drum. Tension rollers are adjustable in height and hold down pressure, eliminating snipe. Heavy-duty cast iron construction for strength, rigidity and reduced vibration.

We’ve addressed issues common with other drum sanders by adding five features that are exclusive to our 19-38 machines. No other drum sander on the market has these features!

  • Simple alignment feature Just one nut will adjust the conveyor to parallel the sanding head, making aligning the conveyor to the sanding head fast and easy
  • Indexed alignment setting Has an indexed alignment setting for narrow and wide stock. When sanding stock wider than 19”, the index lever will properly adjust the conveyor for flawless wide sanding
  • Easy height adjustments A thrust bearing below the handle and a nut positioned above prevents the drum from moving out of the set position while sanding. No backlash or slop in the height adjustment mechanism allowing easier and smoother height adjustments
  • Extra-wide conveyor to properly support stock over 19” wide. The conveyor table is 22” wide to add support to the work piece
  • Drum will never go “out of alignment” The drum carriage is bolted to the base, preventing any movement or alignment issues

Additional Features

  • INTELLISAND™ Technology: Automatically adjusts conveyor speed based on load
    • Prevents gouging, damaging or burning stock
    • Provides consistent finish even with varying grain pattern and density
    • Greatly increases abrasive planing and dimensioning speed
  • Flatness Guarantee: Precision-flattened steel conveyor bed reinforced with four steel cross sections for no “flex” in conveyor, guaranteeing flatness to less than .010″ across the width of the sander
  • Abrasive conveyor belt offers the best grip for raw wood, giving you the ability to accommodate stock that is much shorter or thinner
  • Patented Abrasive Attachment System effectively tensions the abrasive wraps, preventing loose abrasive and overlap
  • Easiest access to abrasive fastening system of any drum sander! Extra wide space to access fasteners to eliminate need for special tools
  • Self-cooling drum prevents overheating and extends abrasive life
  • Tension rollers are adjustable in height and hold down pressure, eliminating snipe
  • Excellent dust extraction as dust cover is formed to shape of drum Metal, not plastic, is formed to maximize air flow and dust extraction
  • Heavy-duty cast iron construction for strength, rigidity and reduced vibration
loading videos
Loading Videos…

What is the difference between the 19-38 Drum Sander and the 19-38 Combo Sander?

The 19-38 Drum Sander is an open-ended drum sander only; the drum is not interchangeable with any heads. The 19-38 Combo can be equipped with different brush heads for profile sanding (flatter brush head), distressing (wire brush head), cleaning reclaimed wood (nylon brush head), and sanding flat stock with a drum. The 19-38 Combo machine is equipped with an AC Inverter that allows the brushes to be run at variable speeds, whereas the 19-38 Drum Sander only runs at a constant speed.

Can I convert my 110V machine into 220V?

No. The conveyor motor and variable speed control (where applicable) are voltage-specific.

What is the difference between the 19-38 Combo and the 13″ Combo?

There are several differences between these two pieces of equipment. See the chart below for the main differences, and if you still have questions on which machine would be best for your application, please call our office.
19-38 COMBO BRUSH/DRUM SANDER 13″ COMBO BRUSH/DRUM SANDER
Light DutyDirect Drive- Greater range of brush speed (RPM) Medium DutyBelt driven- More low-end torque (important for more aggressive and coarse nylon applications).
Small brush diameter (5″) Larger brush diameter (7-9″)- Longer brush life
  • More aggressive brushing possible
  • Longer bristles offer deeper profile penetration
  • More HP per inch (potentially more aggressive)
110V, 1-3/4 HP motor 110V- 1-3/4 HP motor
38″ working width (2 passes) 13″ working width
4″ thickness capacity 4″ thickness capacity
0-10’/minute conveyor 0-10’/minute conveyor

What is the difference between your drum sanders and other brands?

Intellisand automatically adjust feed speed to help prevent burning of stock. They also increase abrasive life and prevent damaging sander if “over fed”, set too deep or stock is thicker in middle or end. All SuperMax sander have infinitely adjustable conveyor feed rates for precise settings. All SuperMax sanders use a self-cooling drum which effectively dissipates heat from sanding, thus extending abrasive life, reducing the chance of burning and prevents over-heating and warping of the drum. All SuperMax drum sanders are precision engineered for long life. All SuperMax sanders use a computer balanced drum(s) and drive train components to prevent ripple on the surface of stock being processed and to extend life of bearings and other parts. All SuperMax drum sanders use an exclusive abrasive conveyor belt which offers the best grip and no-give grip to stock being sanded. All SuperMax drum sanders use a patented self-tightening abrasive attachment system, making the common task of changing abrasives fast, simple and tool free.

The 19-38 Combo Brush/Drum Sander comes standard as a bench-top unit with a 180 grit flatter style head. Additional brush head styles and the drum head are available for purchase. See below for pricing information.

Item #DescriptionPrice
21938319-38 Combo Brush/Drum Sander (Bench Top)$2,799.00

Optional Accessories

Item #DescriptionPrice
SUPMX-59120Abrasive Cleaning Stick$11.99
SUPMX-71938-1Sanding Drum (19-38 Combo)$199.00
SUPMX-71938-2Wire Brush Head (19-38 Combo)$999.00
SUPMX-71938-3Nylon Brush Head (19-38 Combo)$999.00
SUPMX-71938-7F-CLFolding Infeed/Oufeed Tables for Closed Stand$175.00
SUPMX-71938-CL-1Closed Stand$599.00
SUPMX-71938-DRODigital Depth Gauge$110.00
SUPMX-71938-OPOpen Stand w/ Shelf$175.00
SUPMX-98-0130Casters (Set of 4)$99.00

*Pricing subject to change*

Maximum Width(in): 38 (Two Passes)
Minimum Length (in):  5½”
Maximum Thickness (in):  4 (Varies With Application)
Minimum Thickness (in):  1/32
Dimensions (H x W x H):  24″ x 40″ x 24″
Drum Speed:  1740 RPM
Dust Hood: 1 – 4″ Vacuum Port, min. 600CFM Recommended
Conveyor: 43in. -lb torque, direct drive DC motor, ranged variable 0-10 FPM
Drive Motor (TEFC): 1¾”
Power Requirements: 110V 15 Amp
Net Weight: 264 lbs.
Shipping Weight: 371 lbs.
Shipping Dimensions (L x W x H): 43″ x 16″ x 24″

Additional Features

Flatter: Produces a hand sanded finish on profiles like moulding, raised panel doors, and plywood Nylon: Scuff sand and defuzz stock Wire: Pull the soft grain out from soft woods or clean reclaimed lumber Drum: Dimension or finish sand flat stock Simple alignment feature Just one nut will adjust the conveyor to parallel the sanding head, making aligning the conveyor to the sanding head fast and easy. Indexed alignment setting Has an indexed alignment setting for narrow and wide stock. When sanding stock wider than 19”, the index lever will properly adjust the conveyor for flawless wide sanding. Easy height adjustments A thrust bearing below the handle and a nut positioned above prevents the drum from moving out of the set position while sanding. No backlash or slop in the height adjustment mechanism allowing easier and smoother height adjustments. Extra-wide conveyor to properly support stock over 19” wide. The conveyor table is 22” wide to add support to the work piece. Excellent dust extraction, as metal dust cover is formed to shape of drum. Tension rollers are adjustable in height and hold down pressure, eliminating snipe. Heavy-duty cast iron construction for strength, rigidity and reduced vibration.

We’ve addressed issues common with other drum sanders by adding five features that are exclusive to our 19-38 machines. No other drum sander on the market has these features!

  • Simple alignment feature Just one nut will adjust the conveyor to parallel the sanding head, making aligning the conveyor to the sanding head fast and easy
  • Indexed alignment setting Has an indexed alignment setting for narrow and wide stock. When sanding stock wider than 19”, the index lever will properly adjust the conveyor for flawless wide sanding
  • Easy height adjustments A thrust bearing below the handle and a nut positioned above prevents the drum from moving out of the set position while sanding. No backlash or slop in the height adjustment mechanism allowing easier and smoother height adjustments
  • Extra-wide conveyor to properly support stock over 19” wide. The conveyor table is 22” wide to add support to the work piece
  • Drum will never go “out of alignment” The drum carriage is bolted to the base, preventing any movement or alignment issues

Additional Features

  • INTELLISAND™ Technology: Automatically adjusts conveyor speed based on load
    • Prevents gouging, damaging or burning stock
    • Provides consistent finish even with varying grain pattern and density
    • Greatly increases abrasive planing and dimensioning speed
  • Flatness Guarantee: Precision-flattened steel conveyor bed reinforced with four steel cross sections for no “flex” in conveyor, guaranteeing flatness to less than .010″ across the width of the sander
  • Abrasive conveyor belt offers the best grip for raw wood, giving you the ability to accommodate stock that is much shorter or thinner
  • Patented Abrasive Attachment System effectively tensions the abrasive wraps, preventing loose abrasive and overlap
  • Easiest access to abrasive fastening system of any drum sander! Extra wide space to access fasteners to eliminate need for special tools
  • Self-cooling drum prevents overheating and extends abrasive life
  • Tension rollers are adjustable in height and hold down pressure, eliminating snipe
  • Excellent dust extraction as dust cover is formed to shape of drum Metal, not plastic, is formed to maximize air flow and dust extraction
  • Heavy-duty cast iron construction for strength, rigidity and reduced vibration
loading videos
Loading Videos…

What is the difference between the 19-38 Drum Sander and the 19-38 Combo Sander?

The 19-38 Drum Sander is an open-ended drum sander only; the drum is not interchangeable with any heads. The 19-38 Combo can be equipped with different brush heads for profile sanding (flatter brush head), distressing (wire brush head), cleaning reclaimed wood (nylon brush head), and sanding flat stock with a drum. The 19-38 Combo machine is equipped with an AC Inverter that allows the brushes to be run at variable speeds, whereas the 19-38 Drum Sander only runs at a constant speed.

Can I convert my 110V machine into 220V?

No. The conveyor motor and variable speed control (where applicable) are voltage-specific.

What is the difference between the 19-38 Combo and the 13″ Combo?

There are several differences between these two pieces of equipment. See the chart below for the main differences, and if you still have questions on which machine would be best for your application, please call our office.
19-38 COMBO BRUSH/DRUM SANDER 13″ COMBO BRUSH/DRUM SANDER
Light DutyDirect Drive- Greater range of brush speed (RPM) Medium DutyBelt driven- More low-end torque (important for more aggressive and coarse nylon applications).
Small brush diameter (5″) Larger brush diameter (7-9″)- Longer brush life
  • More aggressive brushing possible
  • Longer bristles offer deeper profile penetration
  • More HP per inch (potentially more aggressive)
110V, 1-3/4 HP motor 110V- 1-3/4 HP motor
38″ working width (2 passes) 13″ working width
4″ thickness capacity 4″ thickness capacity
0-10’/minute conveyor 0-10’/minute conveyor

What is the difference between your drum sanders and other brands?

Intellisand automatically adjust feed speed to help prevent burning of stock. They also increase abrasive life and prevent damaging sander if “over fed”, set too deep or stock is thicker in middle or end. All SuperMax sander have infinitely adjustable conveyor feed rates for precise settings. All SuperMax sanders use a self-cooling drum which effectively dissipates heat from sanding, thus extending abrasive life, reducing the chance of burning and prevents over-heating and warping of the drum. All SuperMax drum sanders are precision engineered for long life. All SuperMax sanders use a computer balanced drum(s) and drive train components to prevent ripple on the surface of stock being processed and to extend life of bearings and other parts. All SuperMax drum sanders use an exclusive abrasive conveyor belt which offers the best grip and no-give grip to stock being sanded. All SuperMax drum sanders use a patented self-tightening abrasive attachment system, making the common task of changing abrasives fast, simple and tool free.
The 19-38 Combo Brush/Drum Sander comes standard as a bench-top unit with a 180 grit flatter style head. Additional brush head styles and the drum head are available for purchase. See below for pricing information.
Item # Description Price
SUPMX-71938 19-38 Combo Brush/Drum Sander (Bench Top) $2,799.00
Optional Accessories
Item # Description Price
SUPMX-59120 Abrasive Cleaning Stick $11.99
SUPMX-71938-1 Sanding Drum (19-38 Combo) $199.00
SUPMX-71938-2 Wire Brush Head (19-38 Combo) $999.00
SUPMX-71938-3 Nylon Brush Head (19-38 Combo) $999.00
SUPMX-71938-7F-CL Folding Infeed/Oufeed Tables for Closed Stand $175.00
SUPMX-71938-CL-1 Closed Stand $599.00
SUPMX-71938-DRO Digital Depth Gauge $110.00
SUPMX-71938-OP Open Stand w/ Shelf $175.00
SUPMX-98-0130 Casters (Set of 4) $99.00
*Pricing subject to change*

Financing

Call today for a detailed quote!
Phone: 866-807-8383
Fax: 800-830-9855

Have A Question?

We pride ourselves on our customer service

Service & Support

Looking for a replacement part or some technical information? Find it here